LARY CE Certificated Rubber Product Injection Molding Machine.
1. European most advanced technology, specialized in the Rubber Injection technology. Injection Machine designed with compact construction, Fully automated production.
2. Only need to put the rubber strip into the feeder, you can achieve automatic metering, preheating, injection, and automatically moving out the mold, opening mold. Full automated production process greatly improved production efficiency, reducing labor intensity, protecting the mold.
3. The process of injection after clamping, greatly reducing the product flash and trimming costs. The product is more compact, to improve the intrinsic quality of the product.
4. With humanized interface, you can set the Curing Time, Injection Volume, Preheating Temperature, Curing temperature, Exhausting Parameters. And the Fault Diagnosis system can guide the maintenance staff to solve the problem in the shortest time.
5. Equipped with automatic Mold Change system. A mold can be replaced within five minutes.
6. Advanced energy-saving hydraulic control system can support 24 hours’ continuous operation, with quickly response energy efficiency.
7. Optional Vacuum System, completely solve the problem of products with air.
8. Two kinds of heating systems are available, electrical heating and oil heating.
Name |
Unit |
Specification |
Injection Device |
Screw Diameter |
mm |
55 |
Screw Rotating Speed |
r/min |
0~120 |
Plasticizing Capacity |
ml/min |
1200 |
Injection Pressure |
MPa |
176 |
Injection Piston Diameter |
mm |
115 |
Injection capacity |
ml |
4000 |
Injection Stroke |
mm |
386 |
Injection Speed Ratio |
ml/s |
130 |
Nozzle Diameter |
mm |
8 |
Nozzle Spherical Diameter |
mm |
19 |
Clamping Device |
Clamping Force |
kN |
4000 |
Clamping Pressure |
MPa |
21 |
Main Cylinder Diameter |
mm |
500 |
Open Stroke |
mm |
500 |
Open Force |
kN |
100 |
Max. Distance of Platens |
mm |
500-600 |
Min. Mold Thinkness |
mm |
100 |
Platen Size |
mm |
700×700 |
Sliding Stroke |
mm |
750 |
Electrical Heating Power |
kW |
27 |
Hydraulic and Electrical Control System |
Max. Pressure of Hydraulic System |
MPa |
21 |
Dosage of Hydraulic Oil |
L |
550 |
Type of Hydraulic Oil |
|
N46 |
Oil Pump and Motor Power |
kW |
15 |
Total Power |
kW |
40 |
General Power Line(three phases four lines) |
mm2 |
25 |
Voltage(single phase) |
V |
AC 220±10% |
Voltage(three phases) |
V |
AC 380±10% |
Control Power and Voltage |
V |
DC 24 |
Temperature Control Sytem |
Dosage of Conduction Oil |
L |
20 |
Type of Conduction Oil |
|
Shell Thermia Oil B or MCH32 |
Flux for Cooling Water |
L/min |
30 |
Pressure for Cooling Water |
MPa |
0.2~0.6 |
Cooling Water Inlet and Outlet Pipeline |
|
1″ |
Others |
Machine Dimension(L×W×H) |
mm |
3700×2800×4400 |
Reference Weight |
T |
13.5 |